End Mills
Non-Center Cut for general purpose profiling and milling of slots and pockets where "plunge" cutting is not required. Manufactured to a (+) tolerance on diameter, they produce a finer finish on work that has previously been rough.
| No./Size | Shank Diam. | Flute length | Overall Length | No. of Flutes |
|---|---|---|---|---|
| 1/8X3/8 | 3/8 | 3/8 | 2-1/16 | 4 |
| 3/16X3/8 | 3/8 | 1/2 | 2-3/8 | 4 |
| 1/4X3/8 | 3/8 | 5/8 | 2-7/16 | 4 |
| 5/16X3/8 | 3/8 | 3/4 | 2-1/2 | 4 |
| 3/8X3/8 | 3/8 | 3/4 | 2-1/2 | 4 |
| 7/16X3/8 | 3/8 | 1 | 2-11/16 | 4 |
| 1/2X3/8 | 3/8 | 1 | 2-11/16 | 4 |
| 1/2X1/2 | 1/2 | 1-1/4 | 3-1/4 | 4 |
| 9/16X1/2 | 1/2 | 1-3/8 | 3-3/8 | 4 |
| 5/8X1/2 | 1/2 | 1-3/8 | 3-3/8 | 4 |
| 5/8X5/8 | 5/8 | 1-5/8 | 3-3/4 | 4 |
| 11/16X1/2 | 1/2 | 1-5/8 | 3-5/8 | 4 |
| 11/16X5/8 | 5/8 | 1-5/8 | 3-3/4 | 4 |
| 3/4X1/2 | 1/2 | 1-5/8 | 3-3/4 | 4 |
| 3/4X5/8 | 5/8 | 1-5/8 | 3-3/4 | 4 |
| 3/4X3/4 | 3/4 | 1-5/8 | 3-7/8 | 4 |
| 13/16X5/8 | 5/8 | 1-7/8 | 4 | 6 |
| 7/8X5/8 | 5/8 | 1-7/8 | 4 | 6 |
| 7/8X7/8 | 7/8 | 1-7/8 | 4-1/8 | 4 |
| 1X5/8 | 5/8 | 1-7/8 | 4 | 6 |
| 1X3/4 | 3/4 | 1-7/8 | 4-1/8 | 4 |
| 1X7/8 | 7/8 | 1-7/8 | 4-1/8 | 4 |
| 1X1 | 1 | 2 | 4-1/2 | 4 |
| 1-1/8X7/8 | 7/8 | 2 | 4-1/4 | 6 |
| 1-1/8X1 | 1 | 2 | 4-1/2 | 6 |
| 1-1/4X7/8 | 7/8 | 2 | 4-1/2 | 6 |
| 1-1/4X1 | 1 | 2 | 4-1/2 | 6 |
| 1-1/4x1-1/4 | 4-1/4 | 2 | 4-1/2 | 6 |
| 1-3/8X1 | 1 | 2 | 4-1/2 | 6 |
| 1-1/2X1 | 1 | 2 | 4-1/2 | 6 |
| 1-1/2X1-1/4 | 1-1/4 | 2 | 4-1/2 | 6 |
| 1-3/4X1-1/4 | 1-1/4 | 2 | 4-1/2 | 6 |
| 2X1-1/4 | 1-1/4 | 2 | 4-1/2 | 8 |